The Cable solutions


BNC CCTV Video/Power Balun Over RJ45 Cable Receiver&Transceiver

Price Unavailable

2xBNC CCTV Video/Power Balun Over RJ45(CAT5/CAT6) UTP Cable Passive Receiver & Transceiver - 300M(color) / 600M(B&W)(VC097)

  • This is 1ch passive Video and Power Balun transceiver, which is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) wire.
  • Receiving and transmitting video/power over UTP/Cat5 cable.
  • Supports all video device, such as cameras, monitors, DVR cards and Recorders, etc
  • 1 pair is required for EACH camera.
Features:
  • Product: High Quality Single channel passive Video and Power Balun
  • Material (External) Plastic, Metal
  • Power-Video signals are routed via UTP and RJ45.
  • Video Input/Output BNC Male
  • Power DC 12V
  • Power Input/Output 2.1x5.5mm Male/ Female
  • The unit is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire
  • Added value of Hi-frequency signal to realize high quality image
  • Exceptional interference rejection.
  • The unparalleled interference rejection and low emissions of the unit allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant
  • Built-in transient protection
  • Save cable cost 30%-50%
Specifications:
 
  • Impedance:
    1.  Coax,male BNC:75ΩUTP(Screwless)Terminal Block or UTP RJ45 Data Connector:100Ω
  • Video:
    1. Frequency response: DC-6Mhz Common-mode/Differential-mode
    2. Rejection: 15khz –6Mhz 60dB type
  • Fit Cable UTP RJ45 Cat5(not include)
  • Transfer Distance:Full-motion CCTV video and Power at distances up to 600m when used with any passive transceiver
  • Wire type:(we recommend to use Cat. 5e, or Cat. 6 Solid cable)
    1.  One Unshielded Twisted Pair 24-16AWG(0.5-1.31mm) Per video signal:DC Loop Resistance 52 ohms per 1,000 ft(18 ohms per 100m)
  • Surge suppression: 6000V 1.2μ S*5μ S  
  • Environment Temperature:-10~+50℃
  • Humidity:0~95%
  • Adapter Size 4.3 x 2.2 x 2.2cm/ 1.7" x 0.87" x 0.87" (L*W*H)

  • Model: CMAC-VBT-KIT2IN1
  • 50 Units in Stock



This product was added to our catalog on Tuesday 10 December, 2013.